Automatic PE Film Bundling Machine
The LJ-500K groups and stacks cartons, then secures each bundle with a heat-sealed PE film band. It supports pharmaceutical, nutraceutical and food carton packaging lines. The current page lists 15–25 and 20–35 bundles/min in different sections; confirm the applicable speed for your carton and configuration.
LJ-500K Automatic PE Film Bundling Machine

From Individual Cartons to a Finished Bundle
The LJ-500K receives cartons from an upstream conveyor, groups and stacks them into a selected arrangement, then feeds PE film around the bundle. The film is heat sealed, cut and cooled before the bundle is discharged for handling or case packing.
Designed primarily for regularly shaped boxed products, it supports pharmaceutical, nutraceutical and food carton packaging. Guides and grouping settings are adjusted to suit the carton and bundle layout.
30–80 mm
30–80 µm
Speed and bundle size are confirmed against the carton sample and configuration.
Request LJ-500K Details →LJ-500K Automatic Carton Bundling Machine
The LJ-500K is designed for grouping boxed products and securing them with PE film. The machine can be discussed as part of a cartoning and case-packing line.
| Modelo | LJ-500K |
| Packaging method | Carton grouping, stacking and direct heat-sealed PE film banding |
| Packaging material | PE film |
| Ancho de la película | 30–80 mm |
| Film thickness | 30–80 µm |
| Bundle speed | Confirm for carton and bundle configuration* |
| Bundle size | Confirm for carton and bundle configuration* |
| Fuente de alimentación | 220 V / 50 Hz |
| Equipment power | 2,000 W |
| Presión atmosférica | 0,6–0,8 MPa |
| Consumo de aire | 20–30 L/min |
| Equipment dimensions | Confirm with technical quotation* |
| Conveyor dimensions | Confirm with technical quotation* |
| Peso | Approximately 980 kg |
* Source-page values for speed, bundling dimensions and machine dimensions differ between sections. Supply carton drawings and bundle layout to confirm the applicable configuration and output.
How the LJ-500K Bundling Process Works
Cartons arrive from the upstream conveyor.
Cartons are counted and stacked into a preset layout.
Upper and lower PE film are positioned around the group.
The band is heat sealed, cut and cooled before discharge.
Carton Handling and Film Bundling Features
Photoelectric Carton Detection
Sensors detect incoming cartons and signal the handling mechanism to coordinate the grouping sequence.
Adjustable Carton Grouping
The published configuration allows 3–10 cartons per lifting cycle; lifting cycles and arrangement can be set for the required bundle.
Upper & Lower Film Rolls
Two PE film rolls supply film for banding the grouped cartons before the joint is sealed and cut.
Coordinated Servo Mechanisms
The source describes servo-controlled lifting, pushing, transfer and sealing-bar movement between stations.
Touchscreen Controls
Operators can access operating modes, stacking parameters, temperature and timing settings through the HMI.
Adjustable Guides & Stops
Conveyor guides, rails, lifting stops and sealing positions can be adjusted for different carton arrangements.
Carton Bundling Across Industries
The LJ-500K is described primarily for regularly shaped boxed products. Confirm product suitability with carton samples.
Pharmaceutical Cartons
Group finished medicine cartons after cartoning and prepare bundles for counting, handling or case packing.
Nutraceutical & Healthcare
Bundle compatible supplement and healthcare product cartons in the arrangement required for the next packing stage.
Food Cartons
Group regularly shaped packaged food cartons for transfer, storage or secondary case packing.
PE Film Bundling vs. Shrink Wrapping
Film bundling: A heat-sealed PE band holds a carton group together while leaving much of the bundle exposed.
Shrink wrapping: Film is wrapped around a product or group and heat is applied to shrink the film around it.
The LJ-500K process described here uses direct sealing and does not require a separate shrink tunnel.
Automatic Bundling Machine Supplier in China
Choosing a carton bundling system involves more than comparing speed. Carton dimensions, stacking patterns, film properties, sealing quality and the connection to downstream equipment all affect the final configuration.
URMACHINE supplies packaging equipment and discusses product samples, machine configuration, technical documentation and line integration with customers.
Talk to Our Bundling Team →What to Send Our Team
Carton samples or drawings, desired bundle arrangement, target output, film requirements, line layout and local electrical supply.
PE Film Bundling Machine FAQs
The existing product information describes direct heat sealing of the PE film band without a separate shrink tunnel.
The source describes adjustable grouping and stacking settings. The available layout depends on carton dimensions and equipment configuration.
Integration with an upstream cartoner and downstream case packing can be discussed. Conveyor dimensions, direction and interface requirements must be agreed for the line.
The machine is primarily described for regularly shaped boxed products. Other products should be evaluated using actual samples.
Información de contacto
Correo electrónico
venti@urmachine.com
Tel.
+86 17365104069
Dirección
N.º 163 de la calle Wangjiang, subdistrito de Dongshan, ciudad de Ruian, ciudad de Wenzhou, provincia de Zhejiang, China
Horario laboral
De lunes a viernes: de 9:00 a 18:00